|
601.7
|
Building materials/assemblies do not require additional site applied material for finishing. 12 points max. awarded.
|
1, 2, or 5
|
For 5 points, 90% or more of the installed wall coverings must be this product. For 2 points, 50 - 90% of the installed wall coverings must be this product. For 1 point, 35 - 50% of installed wall coverings must be this product.
|
|
602.1.6
|
Termite-resistant materials are used for the foundation, all structural walls, floors, concealed roof spaces not accessible for inspection, exterior decks, and exterior claddings within the first 2 ft above the top of the foundation. 2 points available.
|
2, 4, or 6
|
To earn 2 points, product is used in conjunction with other termite-resistant materials for the first 2 ft of all the foundation, floor, and structural wall, wall cladding, and exterior deck components in zones with slight to moderate termite infestation. Four points are awarded when used in conjunction with other termite-resistant materials for the first 3 ft in moderate to heavy termite zones, and 6 points are awarded for use with other termite-resistant materials for all of the foundation, floor, and structural wall, wall cladding, and exterior deck components in areas of very heavy termites.
|
|
604.1
|
Building materials with recycled content are used for two minor and/or two major components of the building. 1-6 points available.
|
2 or 4
|
Points awarded for 2 products w/ recycled content. Another major product with at least 50% recycled content required for 4points. Another minor product with at least 50% recycled content required for 2 points.
|
|
610.1.2.1
|
A product with improved environmental impact measures compared to another product(s) intended for the same use is selected. 2 points for product with 4 impact measures; 3 points for product with 5 impact measures. 10 points max.
|
2
|
Points are available when Cedarboards are chosen over other exterior cladding products based on information at www.certainteed.com/resources/FC_LCA_Report_FC057.pdf The material compared to must be one suitable for the building and the local market.
|
|
611.1.2
|
At least 10 different products are installed with product-specific Type III EPDs. All EPDs are certified as complying with the goal and scope for cradle-to-gate requirements in accordance with ISO Standards 14025 and 21930. 5 points available.
|
5
|
A minimum of 10 products with certified EPDs were selected and installed.
|
|
612.1
|
The aggregate value of building products from registered ISO 14001 or equivalent production facilities is =1% of the estimated total building materials cost. 1 point awarded per %; 10 points max.
|
1-3
|
Points are awarded at 1 point per one percent of building material costs. Material cost breakdown to be verified and points adjusted to reflect actual percentage of all products from 14001 facilities.
|